Jazyky
Arabic Czech German Greek English Spanish Finnish Hungarian Italian Lithuanian Latvian Dutch Polish Portuguese Russian Slovak Swedish Turkish Ukrainian
Váš košík
Váš košík je prázdný!
Zaregistrovat
Pokud chcete dostávat naše novinky emailem, prosím vyplňte Vaši emailovú adresu do políčka dole a stiskněte tlačítko 'Zaregistrovat'.

"The Colossus" 100% 18 Gauge Stainless Steel DRUM for BBQ - Welded Construction - Roasts 20 lb.!
"The Colossus" 100% 18 Gauge Stainless Steel DRUM for BBQ - Welded Construction - Roasts 20 lb.! Verze pro tisk Doporučit příteli
"The Colossus" 100% 18 Gauge Stainless Steel DRUM for BBQ - Welded Construction - Roasts 20 lb.!
Kliknite sem pro větší obrázek
Cena: $1,154.95

Množství:
Hlavní vlastnosti:
Roast 20 lb. in your BBQ! "The Colossus" Stainless Steel Model.

100% 18 Gauge Stainless Steel throughout.

4 interior fins that run full length of drum.

Drum has 13" end caps; drum cylinder is 12" diameter by 26" in length.

Fully welded construction.  No rivets used in unit.


Přidať do košíku Zobrazit košík Kasa
 Popis
"The Colossus"
 
Recommended Use:  Commercial
Capacity:  20 lbs. of Peanuts
Size:  13" Diameter End Caps;
Cylinder Size 12" Diameter by 26" in Length
 
Hand-Crafted With Pride in the U.S.A.
 
The Colossus Is Gigantic.
 
This Massive Peanut Roaster Drum roasts up to 20 pounds of nuts and comes fully assembled and ready to go! Fits inside of your Barbeque unit and attaches to your existing Heavy Duty Rotisserie unit (must be a rotisserie that has only 2 tines on each prong unit).  If you do not have a Rotisserie unit for your BBQ you will need to have a Heavy Duty Rotisserie that can handle at least 50 pounds of weight (nuts + weight of drum). Email me at len@peanutroasting.com if you have any questions on recommended BBQs and rotisseries for this drum. 
 
Highlights:
  • Roast 20 lb. in your BBQ! "The Colossus" Stainless Steel Model.
  • 100% 18 Gauge Stainless Steel throughout.
  • 4 interior fins that run full length of drum.
  • Drum has 13" end caps; drum cylinder is 12" diameter by 26" in length.
  • Perforated Stainless Steel Cage has 1/8" or 3/16" Diameter Perforated Holes (your choice)
  • Fully welded construction with high strength stainless steel rivets used in key areas
  • End cap where you put nuts in and dump them out has a hinged door for easy access

This is "The Colossus" Model which is a 100% 18 gauge Stainless Steel construction.  Welded Construction with high strength stainless steel rivets used in key areas.  The end cap plates are 18 gauge Stainless Steel; the cage is 18 gauge Perforated Stainless Steel and has 1/8" or 3/16" Diameter Perforated Holes (your choice); the interior finwork (total fins: 4) are 18 gauge stainless steel, are all 1 3/4" in height and go the full length of the drum.   This drum is suggested for commercial high-volume roasting, or similar heavy demand roasting applications.  For average home roasting use, it is suggested that you purchase my less expensive $109.95 Standard Aluminum sidewall design or $209.95 Premium 20 gauge Stainless Steel caged design.  Also available for 10 lb. capacity is my "EL SUPREMO" drum at $499.95.

This is a JUMBO drum (end cap plates are 13 inches in diameter; drum cylinder is 12 inches in diameter by 26 inches in length).  It is built like a fortress, using welded construction.  This drum is designed for the commercial nut roaster.  You must have a BBQ that will fit this big drum and a Heavy Duty rotisserie (2 tines on each prong set, not 4.  If you have 4 tines, 2 tines on each prong set can be cut off to accomodate this drum).  Sorry but no alterations are made on the size of the drum.  It only comes in the size referenced above.

This drum is designed to easily handle up to 20 pounds of nuts.  Nuts are put in drum through one of the end caps, part of which is hinged for easy access; other cap is permanently attached.

PLEASE BE SURE TO LOOK AT ALL PICTURES OF
DRUM SHOWN AT BOTTOM OF THIS LISTING!

Pictures of Drum shown on this item description.  Rotisserie Unit you would attach to drum to make it rotate in your BBQ grill is NOT included in this offer.  We fit this drum to your current rotisserie which MUST be Heavy Duty and have 2 tines on each prong set (not 4 tines on each).  You would place the unit inside of your BBQ unit, attached to your Rotisserie Unit. We also provide complete details on attaching the Drum to your rotisserie.


Answers to Frequently Asked Questions:

Q: I do not have the rotisserie to put the drum on. Do you have suggestions on a good Rotisserie unit for this application?
A: Yes. It MUST be heavy duty
, able to support 50 pounds, with Electric Motor. Email me at len@peanutroasting.com if you wish to have me provide suggestions on rotisserie and BBQ type.

Q: Are there any non-metal parts that are part of the drum unit?
A: Absolutely not. The drum is 100% 18 gauge Stainless Steel metal construction. 

Q: Does this roaster have vertical fins inside of the roasting drum to help evenly distribute the nuts during the roasting process? I cannot tell from the picture.
A: Yes in fact it does. The fins (4 of them) are attached inside of the drum, and significantly help in the roasting process.

Q: Is this drum designed for Gas or Electric Grills, or both?
A: While you may be able to get a decent roast with an electric grill, a gas grill is the preferred type as you can regulate the heat much quicker, which helps out with the roasting process.


NOTE: Please allow 3 weeks (15 business days) from order payment date until shipment commences, as we hand make all these "The Colossus drums to order. THANKS!


Here are some pics:



 
"The Colossus" shown above in modified Perfect Flame Grill
(motor system & grill not included)



Doručení: Can ship anywhere



powered by
CaffeBLOG

site design by
programmerPROS.com



© Copyright 2005, 2006 PeanutRoasting.com

a division of
VenturesLLC.com LLC

All Rights Reserved